Support — Fusion Archery | Warranty, Service & FAQ

Warranty

Lifetime Limited Warranty

Every Fusion Archery compound bow is backed by a lifetime limited warranty to the original owner against defects in materials and workmanship. We build them to last — and we stand behind them.

Covers all machined parts and limbs
Original owner, with proof of purchase
Service through any authorized dealer

Strings, cables, and finish are not covered — they're considered normal wear and maintenance items. Full terms are provided with each bow and available from your dealer.

Activate Coverage

Register Your Bow

Register within 30 days of purchase to activate your warranty and speed up any future service.

Questions

Frequently Asked

How do I tune or adjust my Fusion bow?

Tuning isn't tool-less, but no bow press is needed. The limbs move with a Torx drive for quick, easy tuning — so draw length and tuning adjustments can be done at home without a press.

What draw weights and lengths are available?

Draw weights offered are 50, 60, 70, and 80 lb. Draw lengths are broadly adjustable across the lineup — see each model's spec sheet on the Bows page for exact ranges.

What are the draw-length module settings?

Each model uses a numbered draw-stop setting. Settings 1–2 use the LD module with draw stop A; 3–7 use the B module with draw stop B; 8–12 use the draw stop with no letter. The "Line" column is the line on the limb the stop or module aligns to.

F 31

Setting	Module / Draw Stop	Draw Length	Line
1	LD module + draw stop A	30"	1st
2	LD module + draw stop A	29.5"	2nd
3	B module + draw stop B	29"	2nd
4	B module + draw stop B	28.5"	3rd
5	B module + draw stop B	28"	4th
6	B module + draw stop B	27.5"	5th
7	B module + draw stop B	27"	6th
8	Draw stop (no letter)	26.5"	4th
9	Draw stop (no letter)	26"	4th
10	Draw stop (no letter)	25.5"	5th
11	Draw stop (no letter)	25"	5th
12	Draw stop (no letter)	24.5"	5th

F 33 (33MG)

Setting	Module / Draw Stop	Draw Length	Line
1	LD module + draw stop A	30.5"	1st
2	LD module + draw stop A	30"	2nd
3	B module + draw stop B	29.5"	2nd
4	B module + draw stop B	29"	3rd
5	B module + draw stop B	28.5"	4th
6	B module + draw stop B	28"	5th
7	B module + draw stop B	27.5"	6th
8	Draw stop (no letter)	27"	4th
9	Draw stop (no letter)	26.5"	4th
10	Draw stop (no letter)	26"	5th
11	Draw stop (no letter)	25.5"	5th
12	Draw stop (no letter)	25"	5th

F 35 (35MG)

Setting	Module / Draw Stop	Draw Length	Line
1	LD module + draw stop A	31.5"	1st
2	LD module + draw stop A	31"	2nd
3	B module + draw stop B	30.5"	2nd
4	B module + draw stop B	30"	3rd
5	B module + draw stop B	29.5"	4th
6	B module + draw stop B	29"	5th
7	B module + draw stop B	28.5"	6th
8	Draw stop (no letter)	28"	4th
9	Draw stop (no letter)	27.5"	4th
10	Draw stop (no letter)	27"	5th
11	Draw stop (no letter)	26.5"	5th
12	Draw stop (no letter)	26"	5th

Note: setting #12 has about 78–80% max let-off. The cable contacts the cable post, so it can't achieve any more let-off once it stops on the post.

How often should I replace strings and cables?

For most shooters, every 2–3 years or roughly 3,000–5,000 shots — sooner if you see fraying, serving separation, or peep rotation. Strings and cables are normal maintenance items and aren't covered under warranty.

Do you sell directly, or only through dealers?

Fusion bows are sold and serviced through our network of authorized dealers so you get a proper fitting and local support. Find a dealer near you.

How do I make a warranty claim?

Contact the dealer you purchased the bow from — not Fusion Archery directly. Bring your proof of purchase and they'll start the claim and handle the rest.